
SAFETY PRACTICES / ELECTRICAL, GENERAL
Preheat the grill for approximately 5 minutes
minimum. The hot grill sears the food, sealing in
The longer the preheat time, the faster the meat
browns and the darker the brand marks.
Grilling requires high heat for optimum results.
High heat is necessary for searing and proper
browning. Most foods are cooked at medium
heat settings for most of the cooking time.
However, when grilling large pieces of
The rangetop burner valves have infinite
settings and there are no fixed positions on the
control knobs between HI and SIMMER. To
rangetop burner on, push in the
to the "LITE" position. An
sound will be heard. When the gas
been ignited by the electronic spark igniter,
the knob to the desired setting.
Note: If the Igniter continues to click after the
burner has been lit, turn the knob to a setting
other than LITE, or HI. If the problem still persists,
please call our Service Hotline at 866
CAUTION! When turning on any RANGETOP
burner, be sure to stop at the "LITE" position
before turning the burner to a flame setting for
cooking. If the burner is not lit and it is turned
beyond the "LITE" position, to HI, MEDIUM, or
LO, there will be a burst of flame when the burner
does light. This could cause burns or damage to
the surrounding counter top.
The burner grates are a heavy cast iron. They ere
designed in sections to make them easier to remove
For best results we recommend using Professional
Cookware. These types of utensils can be found at your
finer department stores, specialty cooking shops, or
restaurant supply stores. If using regular cookware
be very careful if pans have plastic handles, as our
burners can melt or bubble the handles.
The control knobs are readily associated with
burners they control. The RANGETOP control
are labeled in front of the burners. The
control is placed slightly higher than the
control knobs. This is due to the physical size
of the commercial type thermostats used on the
Use extreme care when placing th e
components into the grill compart-
igniter that could break,
Do not leave the grill unattended while in use.
Do not use charcoal briquettes, ceramic plates, or
After removing all packaging materials, check to
be certain that the grill components are correctly
assembled in the grill box. The grill grates and
the burner are assembled in the grill box from
Note: Your grill racks are made of cast iron and
Wok grate is available as accessory for wok cooking
fry: This can be placed on any top burner, by
removing the top grate and placing the wok grate
deliver high intense heat, by spreading the flame under
the diameter of the wok pan.
top burners have electronic spark ignition
to eliminate continuously burning pilots. When the main
burner flame is blown out, it will relight.
wn ignition module. If one module fails
all others will continue to work and you are not inconven-
If a burner does not ignite, listen for the clicking
sound. If the burner does not click, TURN OFF
BURNER. Check the circuit breaker for a blown
fuse or a tripped circuit breaker. If the igniter still
fails to operate, please call our customer service depart-
If you are using propane gas, a slight pop or flash may
occur at the burner ports a few seconds after the burner
has been turned "off". This "extinction pop" is normal for
The burner should light within approximately 45 seconds.
Kommentare zu diesen Handbüchern